MF-8A.1 EPDM - Pressure Sensitive Pipe Seal with 20" Pressure Sensitive Cured Flashing

U-1F EPDM - Metal Bar Edge Termination

U-5A EPDM - Curb Flashing - EPDM Membrane

U-5B EPDM - Curb Flashing - Pressure Sensitive Curb Wrap with 6" Tape

U-5C EPDM - Curb Flashing - With 20" Pressure Sensitive Cured Flashing

U-5D EPDM - Self-Flashing Curb

U-5E EPDM - New Self-Flashing Metal Curb

U-6B EPDM - Roof Drain - Reinforced Field Sheet with Sump Exceeding 3" per foot

U-13E EPDM - Tie-In Shingled or Metal Panel Roof

U-15A EPDM - Inside Corner Wall Flashing with RUSS (Option 1)

U-15B EPDM - Inside Corner Wall Flashing with RUSS (Option 2)

U-15C EPDM - Inside Corner with Continuous EPDM Wall Flashing

U-15D EPDM - Inside Corner with Separate EPDM Wall Flashing

U-15D.1 EPDM - Inside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties

U-15F EPDM - Outside Corner with Pressure Elastoform Flashing (2 Piece)

U-15G EPDM - Outside Corner with Pressure Elastoform Flashing (1 Piece)

U-15G.1 EPDM - Outside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties

U-18A EPDM - Metal Scupper at Deck

FB-1C.1 - Metal Bar Edge Termination

FB-8B - Field Fabricated Pipe Flashing

FB-18A.1 - Through-Wall Scupper with Pressure Sensitive EPDM Flashing

FB-18B.1 - Through-Wall Scupper with SecurWeld or Sure-Flex Metal

FB-25.1 - Simulation of Metal Roof in Thermoplastic Membranes

U-1C PVC-TPO - Metal Bar Edge Termination

U-5A PVC-TPO - Curb Flashing with TPO or PVC Membrane

U-5B PVC-TPO - Curb Flashing with TPO or PVC Coated Metal

U-5C PVC-TPO - Curb Flashing with CFA TPO or PVC Curb Wrap Corners

U-5D PVC-TPO - Self-Flashing Curb with CFA TPO or PVC Curb Wrap Corners

U-6C and U-6C.1 PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 1 of 2

U-8A PVC-TPO - Pre-Molded Pipe Flashing

U-8B PVC-TPO - Field Fabricated Pipe Flashing

U-8D PVC-TPO - Field-Fabricated Square Tube Flashing

U-8F PVC-TPO - CFA Certified Hot Pipe Flashing

U-9 PVC-TPO - Membrane Terminations, PAGE 1 AND 2

U-12A PVC-TPO - Parapet Flashing - Fastened Into Deck

U-12A.1 PVC-TPO - Parapet Flashing - Fastened Into Wall

U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 AND 2

U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 of 2

U-12B.1 TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 2 of 2

U-12C PVC-TPO - Coated Metal Wall Flashing

U-12F PVC-TPO - Parapet Flashing/No Adhesion - Any Height Option

U-12G TPO SAT - TPO SAT Parapet Flashing with TPO RUSS (SAT, Self Adhereing Technology)

U-12H TPO SAT - TPO SAT Parapet Flashing with TPO SAT RUSS (SAT, Self Adhereing Technology)

U-13F PVC-TPO - TPO/PVC Tie-In to Shingled or Metal Panel Roof

U-13H PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Metal Deck

U-15A PVC-TPO - Pre-Molded Inside Corner Flashing

U-15B PVC-TPO - Field Fabricated Inside Corner Flashing

U-15C PVC-TPO - Inside Corner with Coated Metal Wall Flashing

U-15D PVC-TPO - Pre-Molded Outside Corner Flashing

U-15E PVC-TPO - Field Fabricated Outside Corner Flashing

U-15F PVC-TPO - Outside Corner Flashing with Coated Metal Wall Flashing

U-18A PVC-TPO - Scupper with Coated Metal

U-18C PVC - Scupper with Sure-Flex Non-Reinforced PVC/KEE HP Flashing

U-18D PVC - Scupper with Sure-Flex PVC/KEE HP PS Cover Strip Flashing